壳牌海得力士32液压油

Shell Tellus S Oil：ISO S32,S46,S68) Shell Tellus S Oil (viscosity grade: ISO S32, S46, S68)

 Shell Tellus S hydraulic oil of high quality mineral base oils and incorporate the most advanced additive technology deployment made.  Additive formula contains: zinc-free anti-wear agents, anti-corrosive, such as antioxidants and pour point.

 Shell Tellus S is the top anti-wear hydraulic oil hydraulic oil, the ultimate industry standard for hydraulic oil. Advanced zinc-free, chlorine-free formulation technology to give Shell Tellus S outstanding high performance, work in harsh conditions, the hydraulic power transmission system performance extraordinary.

 Recommended Applications

 Shell Tellus S as hydraulic equipment, hydraulic oil, can be widely used in industry, shipping and mobile hydraulic and transmission systems.  Shell Tellus S also serves as a lubricant widely used in various industrial machinery, such as: gear actuators, bearings, tools, machinery, textile machinery and vacuum pump.

 Performance characteristics

•  Shell Tellus S, developed using the most advanced technology and non-zinc anti-wear additives combined with other advanced technology to meet the performance of this product greatly enhanced, thus ensuring long-term cost to run the machine. Its performance far exceeds the current international standards and specifications of hydraulic oil.
•  Very long service life in different oil pump test Jin was able to verify that the performance together with excellent oxidation and thermal stability (eg: a very long TOST test results), machine maintenance period may be extended to reduce maintenance in trouble.
•  Excellent wear resistance pump. （IP281）S20mg。 In the vane pump test (IP281), Shell Tellus S, spare parts weight loss is less than 20mg. （Lucas PW500,210bar,3000rpm,800C），0.25g， In the piston pump test (Lucas PW500, 210bar, 3000rpm, 800C), the 500 hours slider weight loss 0.25g, only about one-tenth of normal qualified oil.
•  Filter performance is good. As the fine filter in the modern hydraulic equipment are widely adopted, the use of the product can greatly save the cost of acquisition of the filter.
•  A good defense "crawling", and when advanced in the sealing material used in the hydraulic cylinder, if the machine is in low load and slow operation of the state, likely to cause is often said the "creeping" phenomenon.  Shell Tellus S can effectively overcome the phenomena, so that the smooth operation of hydraulic cylinder of fluid.
• Watershed performance and excellent air release.
•  Excellent corrosion resistance properties.

 Shell Tellus T hydraulic oil meet the following specifications:

• Cincinnati Milacrom P68-70 Cincinnati Milacrom P68-70
• Denison HF-0 Denison HF-0
• Rexroth Rexroth
• Vickers M-2952-SVickers M-2952-S (pump wear test)
• M-2950-S M-2950-S (mobile system)
• 1-286-S 1-286-S (Industrial Systems)
• Frank Mchn Frank Mchn
• DiN 51524 DiN 51524 Part II

 Typical data