日本宇部1013NW8PA6参考物性表

Product Description Manufacturer UBE industries.LTD Material ID >PA6-FR< UL File NO. Material Shape Pellet Processing Methods Injection molding Physical Condition Standard Value Unit Density ASTM D792 1.14 g/cm³ Shrinkage MD ASTM D995 1.45 % Water Absorption 23°C, 24 hr ASTM D570 1.80 % Hardness Condition Standard Value Unit Rockwell Hardness ASTM D785 85 M(Scale) Rockwell Hardness ASTM D785 120 R Mechanical Condition Standard Value(dry) Value(wet) Unit Tensile Strength 23°C ASTM D638 73.5 39.2 MPa Tensile Elongation 23°C ASTM D638 170 200 % Flexural Strength 23°C ASTM D790 108 39.2 MPa Flexural Modulus 23°C ASTM D790 2550 735 MPa Shearing Strength ASTM D790 63.7 58.8 MPa Izod Not Impact 23°C ASTM D256 59 490 J/m Izod Not Impact -30°C ASTM D256 39 J/m Thermal Condition Standard Value Unit HDT 0.45MPa Unannealed ASTM D648 175 °C HDT 1.80MPa Unannealed ASTM D648 75 °C Melting Temperature ASTM D4591 215 － 225 °C CTE MD ASTM D696 8.00E-5 cm/cm/°C Electrical Condition Standard Value Unit Volume Resistivity ASTM D257 1.00E+14 Ω.cm Dielectric Strength ASTM D149 28 KV/mm Dielectric Constant 23°C ASTM D150 3.90 1kHz Dielectric Constant 23°C ASTM D150 3.50 1MHz Dissipation Factor 23°C ASTM D150 1.00E-2 1kHz Dissipation Factor 23°C ASTM D150 2.00E-2 1MHz Arc Resistance ASTM D495 119 s Flame Retardancy Condition Standard Value Unit



































日本宇部1013NW8PA6参考物性表

PA6参考物性表